The MD100 is a very quiet and powerful linear actuator for a multitude of applications, e.g. furniture for seating or bedding in the home or care furniture. The linear actuator MD100 was developed specifically for applications with up to 95 mm stroke and offers optimum value for money. Compatible with all controls and power supplies in the MC-series, as are all limoss actuators in the MD1-series.

single drives
  • medicine
  • furniture

Technical data:

Push force

  • to max. 6.000 N


Pull force

  • to max. 5.000 N


Installation length

  • for stroke of 20 mm – 75 mm: min. installation length 215 mm
  • for stroke of 75 mm – 95 mm: min. installation length 235 mm



  • min. 20 mm - max. 95 mm



  • without load up to 40 mm/sec



  • with installation slot 6 mm / cross drilling Ø 10 mm


Duty cycle

  • max. 10 %
  • continuous use max. 2 min with subsequent 18 min break


Additional information:

  • DC-motor
  • Housing colour black RAL 9005 / light grey RAL 7035
  • Aluminium stroke pipe, light anodized
  • Limit switching via micro-switch
  • Protection type IP20, or IP24
  • Protection class III
  • Use as main drive 1 (L1): socket for hand control, DC-cable
  • Use as main drive 2 (L2): socket for hand control and additional drive, DC-cable
  • Use as additional drive (L3): DC-cable for connection with main drive 2 (L2), control MC2-, or MD20-series
  • Use as main drive 4 (L4): socket for hand control and additional drive, control cable to connect with a main drive 2 (L2). Makes a set of four actuators without an additional control box possible.
  • Power supply with SMPS MC1-series



  • Mechanical end stop (MES) 
  • Push only version (no pull)
  • Position detection using hall-effect sensor or additional switches
  • Electrical brake
  • Further mounting possibilities on motor- and stroke pipe side, see technical attachment



Contact us!

by phone
+49 2335 84713-0

by mail

by fax
+49 2335 84713-29